clear

{{alert.title}}

  • {{msg}}
clear

{{alert.title}}

  • {{msg}}

12 in x 3/8 in Simpson Strong-Tie Heli-Tie Helical Wall Tie

12 in x 3/8 in Simpson Strong-Tie Heli-Tie Helical Wall Tie Add to Quote autorenew
close

12 in x 3/8 in Simpson Strong-Tie Heli-Tie Helical Wall Tie

Description
Description

The Heli-Tie helical wall tie is a stainless-steel tie used to anchor building façades to structural members or to stabilize brick walls.

The helical design allows the tie to be driven quickly and easily into a predrilled pilot hole (or embedded into mortar joints in new construction) to provide a mechanical connection between a masonry façade and its backup material. As it is driven, the fins of the tie undercut the masonry to provide an expansion-free anchorage that will withstand tension and compression loads.

The Heli-Tie wall tie is installed into a predrilled hole using a proprietary setting tool with an SDS-plus® shank rotohammer to drive and countersink the tie. Heli-Tie wall ties perform in concrete and masonry as well as wood and steel studs.

Features
  • Installs quickly and easily — with the rotohammer in hammer mode, the tie installs faster than competitive products.
  • Provides an inconspicuous repair that preserves the appearance of the building. After installation, the tie is countersunk up to 1/2" below the surface, allowing the tie location to be patched.
  • Larger core diameter provides higher torsional capacity, resulting in less deflection due to “uncoiling” under load.
  • Fractionally sized anchor — no metric drill bits required.
  • Patented manufacturing process results in a more uniform helix along the entire tie, allowing easier driving and better interlock with the substrate.

50 pcs/ctn

Code: HELI371200A

For California Residents:

WARNING:Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Need to talk to an expert to help with your next project?

Experienced and helpful customer service representatives are standing by ready to help.
call CONTACT US